Octoprint Mk4 (2024)

1. Octoprint setup on MK4/S, MK3.9/S, MK3.5/S XL | Prusa Knowledge Base

  • In this guide, we will get Octoprint running on the Raspberry Pi 4 board and connect it to your MK4 / MK3.9 / XL printer using USB.

  • 1. Introduction, 2. Parts preparation: Raspberry Pi, 3. Preparing…

2. Rate how well Octoprint works with the MK4 - General

  • 7 jan 2024 · My experience of Octoprint on the MK4 has been utterly awful. To be very, very clear, I think this is 100% due to Prusa not implementing a chunk ...

  • For those of you who have used Octoprint with a Prusa MK3, and now have an MK4, how would you rate how well it works on the MK4 compared to the MK3? 5 - Way better 4 - Somewhat better 3 - About the same 2 - Not quite as good 1 - Not good at all

3. Original Prusa MK4 | Octoprint

  • Original Prusa MK4 | Octoprint - all you need to know about 3D printing at one place.

  • Original Prusa MK4 | Octoprint - all you need to know about 3D…

4. Set up OctoPrint on Prusa MK4 - SimplyPrint

5. MK4 - Octoprint Progress Display - General

  • 29 apr 2024 · Is there a timeline for when Octoprint will display it's progress on the MK4 display? Currently just the Ocotpus on there noting serial ...

  • Is there a timeline for when Octoprint will display it's progress on the MK4 display? Currently just the Ocotpus on there noting serial printing. 🙂

6. Prusa MK4 Compatibility & Setup Guide: SimplyPrint, OctoPrint ...

  • Learn all about the specifications of the Prusa MK4 3D printer, whether it's compatible with OctoPrint, Mainsail, Fluidd and SimplyPrint, and how to set ...

  • Discover if the Prusa MK4 3D printer is compatible with OctoPrint, Mainsail, Fluidd, and SimplyPrint. Get comprehensive setup guides and printer specifications here.

7. Prusa XL or Mk4 control via Ethernet? - OctoPrint Community Forum

  • 5 feb 2024 · Does anyone know if Octoprint can control the Prusa XL or MK4 via Ethernet (through my network switches, etc.)

  • Does anyone know if Octoprint can control the Prusa XL or MK4 via Ethernet (through my network switches, etc.) rather than direct USB connection? If not, is this in development/under consideration at all? I'd like to have Octoprint running on a computer in my server racks (the other side of the house from the printer), if possible. If it's not possible, I'll just run another Ethernet cable from my racks to the printer and will just use a USB-over-CAT6 adapter, but I'd rather go directly via Et...

8. Simple plugin to fix Prusa MK4 not reporting back filamant run out

  • 4 jul 2024 · As far as I know, the Prusa Mk4 does not report back to Octoprint that the filament has run out and it needs changing.

  • As far as I know, the Prusa Mk4 does not report back to Octoprint that the filament has run out and it needs changing. The Prusa Mk3 does and its really helpful on long prints. Prusa is not making any attempt to fix this issue, despite it been raised as a defect. I have no confidence they will do. So I started thinking about what the options are here: I could try and update the firmware but discarded that as a stupid idea. A lot of effort to learn it and no guarantee that it would work/ Pres...

9. MK4 X-Idle PiCam Mount for Octoprint by addohm - Printables.com

  • Description. PDF. For this build you'll need 2x M3x25mm SHCS or Panhead screws, 2x M3x14mm screws, 1x M3x10mm screw, 3x M3 nuts, and 2-4 M2 screws.

  • Remixed my original design for the MK4 | Download free 3D printable STL models

10. [Information] Regarding the the new bgcode file format in Prusa Slicer

  • 24 nov 2023 · I'm still playing with the thought of connecting the MK4 to an octoprint instance (Prusa allows it, even has a guide for this, just not really ...

  • Just a quick heads up to all Prusa MINI, MK4 and XL users who are using the latest Prusa Slicer. The printer settings in the latest Prusa Slicer have been updated and the bgcode file format is now the default export setting - which will probably cause confusion for some users, because OctoPrint doesn't support bgcode. quick faq: What is bgcode? the B in bgcode stands for binary. Regular gcode contains ASCII text (normal readable text), while bgcode contains (mostly) binary data. In additio...

11. MK4 6.0.0-RC1 support? - Get Help - OctoPrint Community Forum

  • 6 apr 2024 · Has anyone used Octoprint with the 6.0.0-RC1 code yet? Before I upgrade firmware I wanted make sure it was working. Thanks,

  • Has anyone used Octoprint with the 6.0.0-RC1 code yet? Before I upgrade firmware I wanted make sure it was working. Thanks,

12. MK4 Hyperpixel 4 von MekCreate | Kostenloses STL-Modell ...

  • I wanted Octoprint/Octodash for my MK4, so i remix the old MK3 Hyperpixel to fit the new MK4 :) | Kostenlose 3D-druckbare STL-Modelle herunterladen.

  • I wanted Octoprint/Octodash for my MK4, so i remix the old MK3 Hyperpixel to fit the new MK4 :) | Kostenlose 3D-druckbare STL-Modelle herunterladen

13. RPI bootup causes Prusa MK4 Watchdog Fatal Error - Get Help

  • 29 jan 2024 · What is the problem? Connecting to Prusa MK4 on Octoprint server start up causes the printer to have a watch dog timeout.

  • What is the problem? Connecting to Prusa MK4 on Octoprint server start up causes the printer to have a watch dog timeout. What did you already try to solve it? Unplugging USB cable prior to Octoprint startup can help. But not always. Have you tried running in safe mode? No Did running in safe mode solve the problem? Didn't try it. Systeminfo Bundle You can download this in OctoPrint's System Information dialog ... no bundle, no support!) octoprint-systeminfo-20240129170556.zip (29.3 KB) ...

14. How to Setup OctoPrint on the Prusa i3 3D Printer | Obico Knowledge Base

  • 22 jul 2022 · To connect your Prusa 3D printers to OctoPrint, you will need a Raspberry Pi for the connection. You have the option to choose from a multitude of Raspberry Pi ...

  • Original Prusa i3 MK3S+/Courtesy: Prusa3D

15. OctoPrint

  • OctoPrint is the snappy web interface for your 3D printer that allows you to control and monitor all aspects of your printer and print jobs, right from your ...

  • OctoPrint is the snappy web interface for your 3D printer that allows you to control and monitor all aspects of your printer and print jobs, right from your browser.

Octoprint Mk4 (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Duncan Muller

Last Updated:

Views: 5383

Rating: 4.9 / 5 (79 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Duncan Muller

Birthday: 1997-01-13

Address: Apt. 505 914 Phillip Crossroad, O'Konborough, NV 62411

Phone: +8555305800947

Job: Construction Agent

Hobby: Shopping, Table tennis, Snowboarding, Rafting, Motor sports, Homebrewing, Taxidermy

Introduction: My name is Duncan Muller, I am a enchanting, good, gentle, modern, tasty, nice, elegant person who loves writing and wants to share my knowledge and understanding with you.